As Richard Routhier said, volumetric flasks aremore accurate because they are calibrated at a specificvolume[1] . That means that you will get a standard volume, checkwhere the meniscus is and then create the mark for suchvolume..
Also question is, how accurate is a volumetric flask?
Beakers and Flasks They are usually accurate to within 5%. Thevolumetric flask, designed for greater precision, istypically accurate to within 0.05%.
Subsequently, question is, why is the volumetric pipette the most accurate? Volumetric pipets are so accurate becausethe long neck decreases the error in measuring volume of themeniscus. Volumetric Flasks: These flasks are generally themost accurate measuring device, but are only designed tomeasure one specific volume.
Similarly, it is asked, why are volumetric flasks so accurate?
Cylinders are designed to contain an accuratelyknown volume, but are usually used to dispense thatvolume. Therefore, they are not as accurate as avolumetric flasks, but the fact that they are graduatedmakes them more versatile than volumetricflasks.
Which is more accurate graduated cylinder or volumetric flask?
Graduated cylinders are generally moreaccurate and precise than laboratory flasks andbeakers, but they should not be used to perform volumetricanalysis; volumetric glassware, such as a volumetricflask or volumetric pipette, should be used, as it iseven more accurate and precise.
Related Question Answers
How do you calibrate a volumetric flask?
Calibrate a 10 mL volumetric flask byweighing it empty (and dry) and filled to the mark with distilledwater. Fill the flask and empty it three times to performthree replicate measurements for the flask. It is notnecessary to oven dry the flask between thesemeasurements.What instrument is most accurate in measuring volume?
Graduated cylinders, beakers, volumetric pipets, buretsand volumetric flasks are five kinds of glassware often used tomeasure out specific volumes. Volumetric pipets,flasks and burets are the most accurate; the glasswaremakers calibrate these to a high level ofaccuracy.Could you use a 100 mL volumetric flask to deliver 50.0 ml of liquid?
3.Could you use a 100-mL volumetric flask todeliver 50.0 mL of a liquid? Explain.No.100-mL volumetric flasks hold over 50.0 mL ofa liquid, but are marked TC and not TD. The device is notmeant to transfer exactly all of the liquid that iscontained.What is the line on a volumetric flask called?
Volumetric FlasksThe volumetric flask, available in sizes rangingfrom 1 mL to 2 L, is designed to contain a specific volume ofliquid, usually to a tolerance of a few hundredths of a milliliter,about 0.1% of the flask's capacity. The flask has acalibration line engraved on the narrow part of itsneck.Why is it acceptable to use a clean wet volumetric flask?
A volumetric flask should always be rinsed with asmall amount of the solvent to be used. This step preventscontamination of the solution from water or other contaminates onthe glassware's inside walls and removes the need to dry theflask.Is a Buret TC or TD?
All Kimble calibrated ware is marked either“TC” or “TD”. When thegraduation line denotes the volume contained in the calibratedvessel, the ware is marked “TC”. When thegraduation line indicates the volume delivered from the vessel, theware is marked “TD”.What is the difference between TC and TD glassware?
All glassware designed for volumetric measurementare labeled either TD or TC. TD glassware isused "To Deliver" while TC glassware is used "To Contain".Graduated cylinders are used to deliver low accuracy volumes. Bothpolypropylene plastic and glass graduated cylinders can beautoclaved as necessary.Is a beaker TD or TC?
Calibrated pipets, burets, syringes and droppers areT.D. glassware; volumetric flasks and cylindrical or conicalgraduates are T.C. Erlenmeyer flasks, beakers, andprescription bottles, regardless of markings, are NOT volumetricglassware, but are simply containers for storing and mixingliquids.Why do we use volumetric flasks?
The volumetric flask is used for measuringaccurate volumes of liquid materials for laboratory experiments.They are favored when available because they are more accurate thangraduated cylinders and beakers, which are other pieces ofequipment that are used to measure liquids.What does TD mean in chemistry?
A pipet marked TD (the more common type of pipet)has been calibrated "to deliver" a specified volume of liquid.These pipets have no base mark, the graduations continue onto thetip and are graduated to deliver which means that ALL the measuredliquid in the pipet must be delivered.How do you know that glassware is clean?
To check if the glass is clean just fill it withthe distilled water and empty it. Water should form a smooth sheet.If the glass was clean and wettable, there will be nodroplets visible, if the glass was greasy - they will be present.It is best to clean the glass immediately after it wasused.What is the difference between Class A and Class B glassware?
Glassware designated Class A signifies acompliance with applicable construction and accuracy requirements.Class A instruments are the preferred choice for volumetricdeterminations. Class A flasks are ISO9000compatible.What glassware is most precise?
Graduated cylinders, beakers, volumetric pipets, buretsand volumetric flasks are five kinds of glassware often usedto measure out specific volumes. Volumetric pipets, flasks andburets are the most accurate; the glassware makerscalibrate these to a high level of accuracy.What is the volume of a pipette?
A 5000 μl (5 ml) pipette, with thevolume to be transferred indicated. 500 means that theamount transferred is 5000 μl. A 1000 μl (1 ml)pipette, with the volume to be transferredindicated.Is a pipette accurate or precise?
A pipette is accurate to the degree thatthe volume delivered is equal to the specified volume.Precision, on the other hand, is concerned with thecloseness of several measurements to each other, rather than to astandard value, that is the reproducibility of the pipettingsamples.How many decimal places do you read a 50 mL graduated cylinder?
The 10-mL graduated cylinders are always readto 2 decimal places (e.g. 5.50 mL) and the100-mL graduated cylinders are always read to 1decimal place (e.g. 50.5 mL). so that the line at thebottom of the meniscus gives the most accuratereading.What is the tolerance for a Class A 10 mL volumetric pipet?
The tolerance depends on the size: a 0.5-mLpipette has a tolerance of ±0.006 mL,while a 50-mL pipette has a tolerance of ±0.05mL. (These are for Class A pipettes;Class B pipettes are given a tolerance oftwice that for the corresponding Class A.)Why is a graduated cylinder more accurate?
Strengths and Purposes of Graduated Cylinders andBeakers. While they are generally more accurate andprecise than laboratory flasks and beakers, they should notbe used to perform volumetric analysis. They are also sometimesused to measure the volume of a solid indirectly bymeasuring the displacement of a liquid. 
Sarah Silva 
