1. Soak the screw in a lubricant like PB blaster.
2. Use a screwdriver to remove the screw.
3. Use an electric drill with a steel drill bit to drill through the center of the screw.
4. Replace the screw with a stainless steel screw which will be less likely to rust and cause a problem in the future.

.

Accordingly, how do you remove a bathtub drain ring?

1. First, remove the stopper.
2. Insert the Drain Key or the Smart Dumbell into the drain.
3. Keep turning drain counterclockwise until the old drain is released - it shouldn't take too many turns before the drain comes right out.
4. Clean drain area, making sure to remove all old putty residue.

Additionally, how do I remove a tub drain and replace it? Replacing Bath Tub Drain

1. Step 1: Choose Your Tools. Items needed to remove and replace a modern screw in bath tub drain (not all drains are like this).
2. Step 2: Remove the Old Drain. Insert the Drain Key into the drain.
3. Step 3: Clean the Seating Area and Apply Fresh Plumbers Putty.
4. Step 4: Insert the New Drain.

In this way, how do you remove a bathtub drain cover without screws?

Drain Cover Without Screws

1. First, you need to spray some lubricant along the drain cover's lip.
2. Next, insert a pair of needle-nose pliers into an opening on the drain cover.
3. With firmness, hold the pliers securely with both hands - one hand per grip and then twist to the left.

How do you fix a bathtub drain stopper that is stuck?

Toe-Touch. Pull up on the toe-touch bathtub drain stopper, placing it in the open position. Use an old rag to help grip the stopper if you have difficulty pulling up on the stuck stopper. Turn the stopper counterclockwise to unscrew the stopper from the drain body.

Related Question Answers

Can you replace a drain in a bathtub?

How do you remove an old bathtub?

1. Turn off the water to your bathroom.
2. Locate the pipes that deliver water to your bathtub.
3. Disconnect the tub drain using your adjustable wrench.
4. Break away the bottom row of tiles that surround the tub, using a hammer and chisel.
5. Insert a pry bar and pry the tub away from the wall.

How do you hook up a tub drain to a P trap?

1. Wrap plumbing tape around the threaded outlet of the bathtub drain and screw on a 1 1/2-inch PVC female threaded adapter.
2. Slip the trap onto the nipple and swivel the other end to face the waste stack.

How do you remove a push pull tub stopper?

1. Lift the stopper to the open position.
2. Hold the stopper body firmly by hand, and twist the knob counterclockwise to remove it.
3. With the cap removed, unscrew the mounting post beneath the cap counterclockwise to separate the stopper from the drain fitting.

How do you remove a toe drain stopper from a bathtub?

1. Place a towel in the bottom of the bathtub to protect the tub's finish while you work.
2. Lift the toe-tap stopper with your fingers until it will lift no farther.
3. Pull upward on the stopper as you turn it counterclockwise if the stopper only spins instead of unscrews from the drain.