1. Ensure that your set-top box is on and turn theTV on.
2. Press the Setup button for three seconds, or untilthe light at the top of the remote changesfrom red to green.
3. Enter 9-9-1 and the light should flash twice.
4. Press the Channel up key repeatedly, with a one seconddelay between each push, until the TV turns off.

.

Likewise, how do I pair my Xfinity xr2 remote to my cable box?

Press the Setup button on your remote until theLED at the top changes from red to green. Press the xfinitybutton on the remote. The LED will begin flashing green.(Note: When pairing an XR2 or XR5 remote to aDTA, you may need to press the xfinity button up to fivetimes).

Likewise, how do I program my Comcast remote for volume? Re: Xfinity remote control of TV volume

1. Press and hold the "Setup" key until a device key blinkstwice.
2. Type in the code 993. A device key should blink twice.
3. Press and release the Volume Up (Vol +) button.
4. A device key will blink FOUR times if successful.

Also asked, how do I program my xr11 remote?

Pair Your Remote For Voice Control

1. Press and hold SETUP until the LED turns GREEN.
2. Press the Xfinity button.
3. Follow the on-screen instructions to enter the 3-digit codethat appears.
4. The remote is now paired and voice commands should work whenyou hold down the VOICE CONTROL key.

How do I set up favorites on my Xfinity xr2 remote?

Navigate to the channel you wish to add toFavorites. Press the left arrow button on the remoteto highlight the channel and press OK. Use the right arrow buttonto highlight Favorite. Press OK on the remote to addthe channel as a favorite.

Related Question Answers

How do I program my Comcast remote to the cable box?

1. Press and hold the “Setup” key until a device key(TV, Cable, AUX) blinks twice.
2. Enter the code 9-8-1.
3. A device key will blink four times confirming the reset wassuccessful.
4. Repeat the procedure with the code 9-8-2. This will unlock theremote from its previous box.

How do I fix my Comcast remote control?

1. Press the Setup button until the LED at the top of the remotechanges from red to green.
2. Press 9-8-1.
3. The LED will blink green twice to indicate that the remote wasreset.

How do I program my Comcast universal remote?

How do I connect my remote to my TV?

1. Hold down the program button on the remote control for 3seconds. This button mighty be displayed on the remote as"PRG."
2. Press the "TV" button on the remote control to let the remoteknow it will be syncing with a TV.
3. Find the proper codes for the TV you are programing.

How do I disconnect my Comcast remote from my cable box?

1. Press the Setup button on the remote until the LED at the topof the remote changes from red to green.
2. Press 9-8-7.
3. The LED will blink green twice indicating that the remote hasbeen unpaired.

Can I use my Xfinity Remote as a universal remote?

How do I program my black Comcast remote?

1. Before starting, make sure that the little black box is hookedup correctly and you have a picture on your TV.
2. Start by turning your TV on.
3. Press and hold the small white button labeled “Set”until the red light flashes twice.
4. Press the numbers 9-9-1 and you will see the red light flashtwo more times.

How do I reset my xr11 remote?

How do I pair my Comcast remote without the setup button?

1. Make sure the remote batteries are installed and your TV and TVBox are powered on.
2. Set the TV input to the input connected to the Xfinity X1 TVBox.
3. Press and hold the xfinity and Info buttons for 5 seconds.

Where is the Setup button on my Xfinity Voice Remote?

How do I program my spectrum remote to my TV?

1. Search for the device code using the list above.
2. Turn on the TV you wish to program.
3. Press the TV Power key on the remote.
4. Press and hold TV and SEL until the LED blinks twice, thenrelease.
5. Enter the first code listed for your brand.
6. Press the TV Power key to test the TV control.

Does the Xfinity Voice remote have a sleep timer?

How do I reset my Xfinity xr2 remote?

1. First, place the remote into Setup mode. Press the Setup buttonuntil the LED at the top of the remote changes from red togreen.
2. Then, Enter the factory reset code. Press the digits9-8-1.
3. Then, the reset completes.
4. Done!

How do I access the TV menu on my Xfinity Remote?

What is the D button on the Xfinity Remote?

How do I program my Comcast remote to favorites?

1. On the remote, press the Guide button once to access the mainguide.
2. Navigate to the channel you wish to add to Favorites.
3. Press the left arrow button on the remote to highlight thechannel and press OK.
4. Use the right arrow button to highlight Favorite.

How do you delete favorites on Comcast remote?

1. Press the "Menu" button on your remote twice to access the MainMenu.
2. Press the arrow keys to select "Setup" and then select"Favorite Lists Setup."
3. Use the arrow keys to select the Favorites list you want toremove.

Can you add a channel to Xfinity?